Injector Return Fuel Line Diesel VW TDI, MB, 3mm IDx1M Braid Cloth Hose End Plug

Description

Diesel Injector Return Line
Mercedes Benz, Volkswagen, Audi, and others
1 Meter length, 3.0mm ID x 7.5mm OD
Plus one End Plug
Genuine German OE spec 3.0mm ID injector return hose made by Continental. We've used this same line on our company Mercedes and two VW TDI diesels with great
success. We always run 100% biodiesel (except in the winter - B80) and the hose holds up extremely well. If you have an old diesel it's probably time to change out your injector return lines. If your lines are showing wetness or are stiff it's time to change them out before they leak. There are other return line kits out there that are 3.2mm to 3.5mm, and they are good as well, but we like the secure fit of the 3.0mm hose. Nothing worse than having one of these pop off while driving.
Purchase includes a 1 meter length of hose and a single end piece with metal plug pre installed in a short segment of hose.
Installation:
This is probably the cheapest and easiest maintenance item on your diesel. Just take some needle nose pliers and wiggle off the old stiff, cracked, and leaking fuel line. Make sure the injector tips are clean. Cut an equal length of new hose and push onto
injector tip. Make sure the new hose is pushed on securely so it does not pop off and spurt fuel everywhere - don't ask how we know this. Move onto the next injector and repeat. The end plug is just that - an end plug. Remove your old plug and replace with the new one. I'd hang onto the old metal plug in case you want to reuse it someday.
Shipping:
Desmoparts keeps dozens of these kits on the shelf and ready to ship. All we have to do is slap a USPS label on the box and it's on the way to your door.
One flat price includes packing and shipping to your door. Buy it today and we'll do our best to get it tendered via USPS same day. If you're in a big hurry choose the
Priority
Mail option at checkout.